Chroma Launches Its New 63000 Series DC Electronic Loads to Satisfy the Tests for Small Power Supplies and Batteries

Chroma 63000

To meet the testing requirements of small power supplies, Chroma has launched a brand new 63000 Series of benchtop DC electronic loads specifically designed for testing lower power adaptors, cell phone chargers, small batteries (such as cell phone batteries), D/D converters, USB PD, and so on. Different from the modular electronic load, they can be used without a mainframe. With the advantages of its compact size, lighter weight, low cost, and portability, the 63000 Series is the perfect electronic load for R&D labs and colleges.

 Chroma 63000

The voltage and current specifications of each model in the 63000 Series are comprised of three settings and three measurement ranges. For adapters and USB PD’s that require higher testing accuracy, small current test like 0.1A is often performed during efficiency testing. However, misjudgment frequently occurs due to insufficient range or low accuracy. The minimum setting and measurement current range of the 63004-150-60 is 2A and the current error is less than 2mA which makes it suitable for these tests and validating the regulatory compliance of Energy Star. The maximum current output of a single load is up to 60A, with power up to 350W. Besides, the large scaled fonts and moderate shortcuts in its 3.5” LCD display bring great usability in the forms of sight and touch.

Chroma 63000 LCD screen

In addition to the basic CC, CR, CP, CV, and CRD modes, the 63000 Series also has battery discharge, User Defined Waveforms (UDW), and programming functions to satisfy the test requirements for D/D converters, 3C battery dischargers, and switching power supplies.

The battery discharge mode is applicable for 3C battery discharge test and can record the Wh (Watt) and Ah (Ah) during battery discharge. The User Defined Waveform (Figure 1) can simulate the real load current allowing the R&D test engineer to verify the power in the actual load current. The quality assurance department can reproduce the actual load current situation to reduce the development and validation time. For other DC power and component applications such as fuel cells, fuses, switches, and wiring tests, the pulse current (Figure 2) function is provided to test them by setting the repeat time to 1 in the existing dynamic loading mode.


Chroma 63000 wave
   Figure 1 User Defined Waveform Figure 2 Pulse Current

With over 30 years’ experience manufacturing test and measurement instrumentation, Chroma continues to create innovative power electronics testing solutions and provides the industry with highly reliable and high performance testing instruments.

For more information about our DC Electronic Loads – 63000 Series, please visit our company website: DC Electronic Load Model 63000 Series

If you would like a product demonstration, email your requirements and preferred method of contact to Chroma is here to serve you. 


A Productive Utility for New Energy Vehicle LV123 Standards Tests Chroma High Voltage DC Power Supply Test Software

Complying with global energy conservation trends and policies driven by international governments, many automakers have released technical development standards for next generation vehicles, which define various electric vehicle tests for hybrid, plug-in hybrid and fuel cell vehicles. Chroma has integrated these regulatory requirements aiming to provide users with specialized and convenient test programs making Chroma a productive partner for testing new energy vehicles.

The test requirements of LV123 are defined by major European carmakers to test the electrical characteristics and safety of high-voltage components in road vehicles, such as HV battery system, inverter, electrical air conditioning compressor, electrical transmission oil pump, DC/DC converter HV/LV and On-board charger, etc. This standard defines the state and operating capability of each voltage range.

The LV123 standard regulates different states for voltage range from 0V to 800V, as shown in the table below, and demands rapid voltage slew rate change. Chroma’s 62150H-1000 DC power supply supports 0-1000V voltage output with up to 40V/ms slew rate control and can meet the LV123 basic electrical characteristics requirements through the test items listed below providing the best solution for testing new energy vehicles.

HV voltage ranges Unit HV_1 HV_2a HV_2b HV_3
Overvoltage at load dump V pk 220 410 500 800
Upper HV circuit limit voltage V pk 220 410 500 800
Maximum operating voltage V d.c. 200 360 470 770
Upper limited operating capability >V d.c. > 190 – 220 > 340 – 460 > 450 – 470 > 750 – 770
Unlimited operating capability V d.c. 90 – 190 170 – 340 250 – 450 520 – 750
Lower limited operating capability V d.c. 80 -< 90 160 -< 170 200 -< 250 450 -< 520
Highly limited operating capability V d.c. 60 -< 80 120 -< 160 200 -< 250
Undervoltage V d.c. 0 -< 60 0 -< 120 0 -< 150 0 -< 450

The following test items are provided according to the LV123 standard.

  1. Range of unlimited operating capability
  2. Range of upper limited operating capability
  3. Range of lower limited operating capability
  4. Range of highly limited operating capability

Chroma integrated the voltage range operating capability of LV123 into the 62000H Series DC power supplies and developed graphical test software based on the regulatory criteria so that the user can perform tests on the UUT with only one key. This not only saves time in the development schedule but also facilitates testing automotive electronics for their long-term performance and stability.

Range of unlimited operating capability
Range of unlimited operating capability

Range of upper limited operating capability
Range of upper limited operating capability

Range of lower limited operating capability
Range of lower limited operating capability

Range of highly limited operating capability
Range of highly limited operating capability

To learn more about the computer graphical user interface:

<Introduction to Softpanel for Model 62000P&H Series>
<Programmable DC Power Supply Model 62000H Series>


The Newest Electrical Mains and Power Line Interference Simulation Testing Software for Download

In recent years, renewable energy has received lots of attention in particular the huge growth of solar energy and wind power. More and more power systems incorporating into the grid could have a significant impact on the current power system. Thus, many standards were set up for integrating renewable energy into the grid such as UL 1741, IEEE 1547, IEEE 1547.1, and NBT 32004, etc.

Moreover, the Low Voltage Ride-Through (LVRT) feature put forward by various countries stipulates that the grid-connected device such as a solar inverter or wind power generator will continue to supply power, when the grid voltage falls, for a period of time until the grid power returns to normal.

To address these requirements, Chroma has released testing software that can simulate the abnormality/distortion of the electrical mains and power line interference. This graphical human-machine interface software controls Chroma’s regenerative grid simulator, the 61800 Series, which is equipped with four quadrant capabilities to satisfy test demands.

In the example below, the power dropped to 0V for 150ms and resumed 70% of output for 550ms, and then spent 800ms to rise from 70% to 90% output capacity. All these conditions can be easily simulated using the software LIST mode. In addition, a preview of the waveform can be seen on the software.

61800 Softpanel

Chroma’s AC Source Software has functions for , LIST mode, STEP mode, PULSE mode, and User-Defined Waveforms (to simulate distorted or interfered mains power). Also, the inter-harmonic test function can simulate the abnormality of the main electrical power.

Screenshots for the software are shown below:

61800 Softpanel

For more information about our testing software, please visit our website:

If you would like to download a demo version to experience the software, please email your preferred method of contact to Chroma is here to serve you.

Chroma ATE Inc.

Best Choice for 48V Automotive Power System Testing Brand New 100V DC Power Supply with Auto-Ranging Output 10kW~150kW

As the trend for global energy conservation and carbon emission reduction leads the evolution of new energy vehicle electrical systems, the world’s major car manufacturers have proposed 48V power system and LV148 regulatory standards for testing new vehicles. Comparing to the previous 12V power system, 48V power system has higher conversion efficiency and increased stable start-stop performance. In addition, the server power supply structure is also moving from conventional 12V to 48V in order to optimize the overall system power conversion efficiency.

(Fig.) Wide operating region with constant power

Chroma launches a new 100V DC power supply, Model 62150H-100P, with auto-ranging output feature to support 40V/50V/60V/…/100V voltage ranges and output up to 15kW full power. It is suitable for testing products with different specifications such as the 48V new energy vehicles from 0V to 60V and the 48V architecture for server power and telecom power. The DC power supply is able to output the power from 10kW up to 150kW when setup in parallel under master/slave structure. It has active current sharing and fast transient response functions with active PFC to put low energy consumption and high conversion efficiency into effect to save energy.

High Accuracy and High Stability
The voltage control accuracy on the front panel and through the communication interface is up to 0.05% allowing users to set the required output. The stability of constant voltage and current is 0.005% for 8 hours operating. The temperature coefficient of drift is 0.005%/°C that provides an accurate and stable power source steadily even after long hours of operation.

Voltage/Current Slew Rate Control
The DC power supply’s voltage slew rate control is from 0.001V/ms to 5V/ms and can integrate with an automatic programming mode to meet the diversified needs of specific applications such as automotive electronic systems. Chroma incorporates the ISO 16750-2, VW 80000 and GS 95024-2 international automotive electronics standards into the GUI, Softpanel, to help users speed up the development and testing task.

(Fig.) ISO 16750-2 Starting Profile

62150H-100P Programmable DC Power Supply for
Large Power Application

Find More Informaiton:
DC Power Supply Model 62000H Series


Chroma Launches Its New Cost-effective High Power DC Electronic Loads – 63200E Series


Chroma launched the new generation high performance high power DC electronic load 63200A series in 2016 and received wide appreciation from customers. In order to serve  more customers and to cover more applications, Chroma followed up by launching the high cost-performance 63200E series with power rating from 2kW to 24kW. Compared with the previous 63200 Series, the pricing is only about 70% and half the size for the same power.


The 63200E Series have high power density (6kW @ 4U) to meet the green energy power testing requirements for solar energy, hydrogen and fuel cells, and electric vehicles related products.

In addition to the basic CC, CR, CP and CV modes, the expected 63200E Series used in the field of electric vehicle testing also have battery discharge mode to satisfy the discharge test requirements for car battery packs. The 63200E Series can record the Wh and Ah during battery discharge. For the DC power and components in the electric vehicle such as car charger, D / D converter, fuel cells, fuses, switches and wiring, etc., all have models and function that can correspond to the tests.

To comply with the high voltage car charger (600V or more) and the low voltage D/D convert (150V or less), the 63200E DC loads have three operating voltages available – 150V, 600V and 1200V. For voltage and current specifications, each model has 3 settings and 3 measurement ranges. The maximum current output of a single load is up to 2,000A, with power up to 24kW. A maximum power up to 240kW can be achieved by using multiple loads in parallel for greater power testing demands.

The 63200E DC loads also have pulse current loading function to test the fuses, switches and wiring by setting the repeat time to 1 in the existing dynamic loading mode.

Pulse Current

The extremely bright VFD display adopted by the 63200E DC load allows users a clear view of test results. Moreover, depending on the desired power level, the DC loads are packaged into either desktop or tower types. On the tower type, the operation panel tilts so that users can easily view and operate the unit whether sitting or standing. All models of the series are designed to a uniform width. Both desktop and tower type models can be mounted into a standard 41U rack enclosure in order to maximize space.

With professional knowledge and abundant experiences in test and measurement instrumentation, Chroma is creating innovative power electronics testing solutions and providing the industry with highly reliable and high performance testing instruments.

If you would like a product demonstration, email your requirements and preferred method of contact to Chroma ATE Inc. We are happy to be of service.

For more information about our DC Electronic Loads – 63200E Series, please visit our company website:

Showing Unique and Innovative Test Technologies All at Once

Chroma ATE Inc. will present its state-of-the-art test technologies at TAITRONICS 2017.

Chroma Demos New EV Wireless Charger Test Platform

Chroma ATE Inc. will be displaying an all new electric vehicle wireless charger test platform at TAITRONICS 2017. EV wireless charging technology will bring significant changes to the industry as it provides convenience to the user, eliminates excessive wear to the charge connector, and greatly reduces risk of electrical shock. Wireless charging technology has been in development for many years and has proved itself in low-power devices. Bringing fast charging solutions to market for high power EV batteries requires high precision, high efficiency test equipment.

High Power Application / Dual Mode Switching Battery Module

In order to meet today’s market requirements for high voltage and high power applications, the battery module specifications must be developed toward the increment of string numbers and power capacity. Chroma’s 17040 battery module testing system (60kW~300kW, 1000V~50V, 150A~750A) is a high precision, high efficiency, and high safety charge and discharge system specifically designed for secondary battery module and pack tests. It has an energy regenerative function to provide clean and stable power (PF>0.95, I_THDHigh Precision / Multi Range Charge and Discharge Test Equipment Specifically Designed for Small Battery

The newly launched Chroma 17216M-10-6 is a high precision (±0.02%F.S.) programmable charge/discharge tester with multiple current ranges (200uA/6mA/200mA/6A) that can accurately apply voltage/current signals to measure the small differences of a DUT (device under test). It also has features of high response speed and high sampling frequency with adjustable voltages providing -5V~+5V, 0 ~ +5V and 0 ~ 10V three measurement ranges for selection that can be widely used in half battery / battery cell, super capacitor and lithium ion capacitance tests. Operating with Chroma’s powerful Battery Pro software, the tester enables the user to perform material analysis, performance testing, dynamic waveform simulation and specification screening on the DUT.

Battery Cell Insulation Test

The traditional insulation test of a battery cell is to measure the leakage current in the final testing phase to determine whether the internal insulation is good. However, it does not detect if partial discharge has occurred during the entire testing process. Chroma 11210 Battery Cell Insulation Tester performs partial discharge detection during the Charge – Dwell – Test process, and then integrates with the final leakage current measured results to evaluate the battery cell’s internal insulation status. The tester allows the user to use the partial discharge phenomenon that occurred during the testing process as criteria for determining the battery cell quality.

The Newest High Voltage Photovoltaic and Microgrid Test Solution

The development of photovoltaics and microgrids are heading towards distributed photovoltaic power generation and energy storage / smart inverter systems. Commercial photovoltaic power generation and energy storage requirements are growing fast and demanding grid-connected high voltage 690Vac / 800Vac systems to reduce the cost of AC wiring and improve the efficiency of power generation system. The latest high voltage 1800V photovoltaic simulator and the 61800 series high voltage 800VLN options are specifically designed to meet the above requirements. Additional new key features of 61800 series include a regenerative AC load option with power range from 30kW to 60kW, capable of simulating the characteristics of rectified and non-rectified loads as well as the phase lead/lag conditions of capacitive/inductive type of loads, etc. It is suitable for smart photovoltaic, energy storage inverter and micro-grid system load simulation tests.

Highly Efficient and Automated Optical Test

Recent advancement in optical inspection technology continues to find its path into a variety of applications. Innovative automated optical testing has become essential and indispensable in areas such as effective dimensional measurement to ensure product manufacturability and process control. The 7505-05 Multi-functional Optical Measuring System recently launched by Chroma is designed for the automatic testing of optical image quality for smartphone metal cases, batteries, cover glasses and other products. Combining both 2D and 3D high-speed real-time measurement capabilities, the system will provide a valuable and effective metrology tool for your production environment.

8K SHV Test Solution

Chroma 8K SHV (Super-Hi Vision) Test Solution: Chroma 2918 FPD Tester and Chroma 2238 Video Pattern Generator adopted modular design are capable of combining different signals and power modules for various test requirements. Their features of high flexibility, scalability and supporting of various industrial communication interfaces, fulfill the testing demands of panel and display industries for 8K ultra-high resolution (7680×4320 / 8192 x 4320).

Fast Transients, Low Noise in Chroma’s New Benchtop DC Power Supplies

Chroma’s newly launched 62000L Series programmable DC power supplies provide low ripple, low noise linear performance and a fast transient response in a lightweight, compact, and cost effective package.

As Chroma’s next generation of power supplies, the 62000L Series delivers pure and stable DC power as well as built-in features designed to meet the stringent requirements of next generation power electronics including automotive power electronics MCU/ECU, communication electronic parts, and semiconductor IC drivers.

Comparison of traditional models

Auto-ranging allows for freely adjusting the voltage and current. This feature eliminates the need to manually select the optimum range allowing all of the power to be available across all of the voltage and current settings.

Fast transient response makes the output voltage that changed due to load characteristics return to a stable supply of power in microsecond response speed. Take the 62010L-36-7 model for example, when the output current changes from half load to full load at the speed of 1A/μs, the voltage change of the actual output can return to 15mV within 30μs.

Low noise input power with pure quality protects the precision load or UUT from the interference of heavy noise. For example, the 62010L-36-7 output voltage noise is lower than 2mVp-p (20~20MHz) under the maximum rated current and maximum output power.

The auto sequencing programming function built into the 62000L Series allows the user to define and edit the output waveforms with 8 steps per cycle.

Conventional linear power supplies are cumbersome due to the frequency design and require more space for ventilation. Chroma simplified the design of the hardware architecture resulting in a better handling compact, lightweight design which is safer to stack.

The brand new 62000L Series programmable DC power supplies features an affordable price, high quality output specifications, practical functions, and standard USB and GPIB communication interfaces making this an excellent choice for testing small power and precision products.


Chroma ATE Inc.

Program DC transient waveforms to simulate automotive and defense voltage variations


Programmable DC power sources

Chroma’s 62000P series of programmable DC power sources allows devices to be verified under a wide range of voltage dropouts, spikes and other voltage variations making the P-series an ideal choice for production and DVT of products used on mobile platforms or which will experience voltage interrupts. Applications include products designed for use on ships, cars, planes and other applications with variable or unstable input power.

Due to their constant power operating envelope the P-series power supplies are uniquely suited for test applications requiring a wide range of high voltage/low current and low voltage/high current stimulus thereby reducing the number of supplies needed in typical applications. The 62000P Series also includes built in 16 bit readback capability for accurate input voltage and current readings. This means ATE systems no longer need complex shunt/multiplexers to make accurate pass/fail readings of the UUT’s input parameters. These instruments also include I/O ports providing 8 bit TTLs, DC-ON, fault output signal and remote inhibit as well as an output trigger signal for system timing measurements.

12 models ranging from 600W to 5000W, up to 120A and up to 600V.

Find Out More